Error Code OC
The washer is overfilling with water because it cannot detect the water level
Critical
Stop using immediately - risk of damage or safety issue
Also displayed as: OC
What This Means
Water level detection not working, so water is supplied continually; Drain hose clogged with foreign material at narrow section; Water supply valve frozen or has foreign material; Water level sensor degraded; Water level sensor terminal out of place
What actually causes this:
The water level sensor hose came loose, so the washer keeps filling without stopping
First Thing to Check
Turn off the washer and the water supply valves behind it immediately to stop the overflow
Parts Involved
How to Fix
- 1
1. Check the hose connected to the water level sensor
- 2
2. Verify the hose is not folded, cut, or damaged
- 3
3. Check whether the water level sensor is degraded
- 4
4. Inspect the drain hose for clogs
- 5
5. In winter, check for freezing in the water supply valve
- 6
6. Use a hair dryer to defrost the hose if frozen
- 7
7. Consider relocating the unit to a warmer location
This Error Applies To
Samsung WD53DBA900HZA1 Series Washers (2024) (2024–present)
Related Error Codes
The humidity sensor inside the dryer is not reading correctly
The automatic door-opening feature is not working after a cycle ends
A dryer button is being registered as stuck or continuously pressed
The heat pump compressor motor has failed or lost its connection
A temperature sensor on the refrigerant line is reading incorrectly
A temperature sensor on the evaporator inlet is reading incorrectly
A temperature sensor on the evaporator outlet is reading incorrectly
A temperature sensor on top of the compressor is reading incorrectly