Error Code SDC
The dispenser drawer is not closing or locking properly
Moderate
Address soon - your appliance may not work properly
Also displayed as: SDC
What This Means
Door lock switch terminal of Housing Drawer connected incorrectly; Door lock switch terminal of Assy Housing Drawer broken; Drawer pulled open by force; Main PCB fault
What actually causes this:
The detergent drawer was pulled too hard and the lock mechanism broke
First Thing to Check
Push the dispenser drawer in firmly until it clicks shut, then restart
Parts Involved
How to Fix
- 1
1. Check the door lock switch terminal connections on the Housing Drawer
- 2
2. Inspect the Assy Housing Drawer switch terminal for damage
- 3
3. Check if the drawer was pulled by force and the lock mechanism is damaged
- 4
4. Check Main PCB
This Error Applies To
Samsung WD53DBA900HZA1 Series Washers (2024) (2024–present)
Related Error Codes
The humidity sensor inside the dryer is not reading correctly
The automatic door-opening feature is not working after a cycle ends
A dryer button is being registered as stuck or continuously pressed
The heat pump compressor motor has failed or lost its connection
A temperature sensor on the refrigerant line is reading incorrectly
A temperature sensor on the evaporator inlet is reading incorrectly
A temperature sensor on the evaporator outlet is reading incorrectly
A temperature sensor on top of the compressor is reading incorrectly