Error Code SUD
There are too many soap suds in the washer drum
Moderate
Address soon - your appliance may not work properly
Also displayed as: SUD
What This Means
Too much detergent used; Non-HE (High Efficiency) detergent used; Excessive foaming detected during wash cycle
What actually causes this:
Too much detergent was added, or regular detergent was used instead of HE detergent
First Thing to Check
Wait for the washer to finish removing the suds on its own — it will resume automatically
How to Fix
- 1
1. Wait for the washer to complete foam removal automatically
- 2
2. When End is displayed, the normal cycle will proceed
- 3
3. Reduce detergent amount for future loads
- 4
4. Ensure HE (High Efficiency) detergent is being used
This Error Applies To
Samsung WD53DBA900HZA1 Series Washers (2024) (2024–present)
Related Error Codes
The humidity sensor inside the dryer is not reading correctly
The automatic door-opening feature is not working after a cycle ends
A dryer button is being registered as stuck or continuously pressed
The heat pump compressor motor has failed or lost its connection
A temperature sensor on the refrigerant line is reading incorrectly
A temperature sensor on the evaporator inlet is reading incorrectly
A temperature sensor on the evaporator outlet is reading incorrectly
A temperature sensor on top of the compressor is reading incorrectly