Error Code 8C2
The vibration sensor inside the washer detected a problem
Moderate
Address soon - your appliance may not work properly
Also displayed as: 8C2
What This Means
Excessive vibration of the unit; Main PCB fault; MEMS sensor fault
What actually causes this:
The washer is vibrating too much due to being unlevel or an unbalanced load
First Thing to Check
Check that the washer is level and not rocking — adjust the feet if needed
Parts Involved
How to Fix
- 1
1. Check unit for excessive vibration
- 2
2. Verify washer is level and on a stable surface
- 3
3. Replace Main PCB if vibration is not the cause
Parts Commonly Needed for This Error
OEM part numbers confirmed by retailers
This Error Applies To
Samsung WF45A6400A Series Washers (2024) (2024–present)
Related Error Codes
A button on the control panel is stuck or pressed in
The washer thinks the door is open
The door lock mechanism is not engaging properly
The small add-door on the front of the washer is open
The small add-door lock motor is not working correctly
The water heater inside the washer is not working right or the washer is overheating
The washer overheated and shut itself off for safety
The washer is filling with too much water and cannot stop