Error Code 8C2
The washer's vibration sensor is not working correctly.
Moderate
Address soon - your appliance may not work properly
Also displayed as: 8C2
What This Means
Error detected in the MEMS PBA; Data error detected in the MEMS sensor; Wire connection fault
What actually causes this:
The vibration sensor board has a loose connection or has failed.
First Thing to Check
Unplug the washer for one minute and plug it back in to see if the error clears.
Parts Involved
How to Fix
- 1
1. Check the wire connections to the MEMS PBA
- 2
2. Replace the MEMS PBA if necessary
This Error Applies To
Samsung WF50K7500A Series Washers (2016) (2016–present)
Related Error Codes
The washer's display screen has lost communication with the main board.
The washer cannot pump out the water after a cycle.
The control panel and the main computer board are not communicating.
The washer's motor cannot spin or is struggling to turn.
The washer cannot detect how much water is in the tub.
The washer is receiving too much electrical power.
The washer's WiFi module has lost communication with the main board.
A button on the washer's control panel is stuck or jammed.