Error Code DC1
The washer's door lock mechanism is not working properly.
Moderate
Address soon - your appliance may not work properly
Also displayed as: dC1
What This Means
Door lock switch terminal is connected incorrectly; Door lock switch terminal is broken; Electric wire leakage occurs intermittently; Main PCB fault
What actually causes this:
The electronic door lock has worn out or has a loose wire connection.
First Thing to Check
Unplug the washer for one minute, then plug it back in and try closing the door again.
Parts Involved
How to Fix
- 1
1. Check the door switch — replace if faulty
- 2
2. Check the main PBA door sensing circuit
- 3
3. Check resistance values normally when you press the door switch button Close
- 4
4. Replace if faulty
This Error Applies To
Samsung WF50K7500A Series Washers (2016) (2016–present)
Related Error Codes
The washer's display screen has lost communication with the main board.
The washer cannot pump out the water after a cycle.
The control panel and the main computer board are not communicating.
The washer's motor cannot spin or is struggling to turn.
The washer cannot detect how much water is in the tub.
The washer is receiving too much electrical power.
The washer's WiFi module has lost communication with the main board.
A button on the washer's control panel is stuck or jammed.