Error Code SUD
There are too many soap suds inside the washer.
Moderate
Address soon - your appliance may not work properly
Also displayed as: Sud / SUdS
What This Means
Too much detergent was used; Non-HE detergent was used in an HE washer; Excessive foaming detected during wash cycle
What actually causes this:
Too much detergent was added, or regular (non-HE) detergent was used instead of HE detergent.
First Thing to Check
Wait for the washer to finish removing the suds on its own — this can take 10 to 20 minutes.
Parts Involved
How to Fix
- 1
1. Wait for the washer to complete the automatic foam removal process
- 2
2. When 'Sud' or 'SUdS' is displayed, foaming is being removed; when 'End' is displayed, removal is finished
- 3
3. This is a normal protective operation to prevent non-sensing faults
- 4
4. Reduce detergent amount for future loads
This Error Applies To
Samsung WF50K7500A Series Washers (2016) (2016–present)
Related Error Codes
The washer's door lock mechanism is not working properly.
The washer's display screen has lost communication with the main board.
The washer cannot pump out the water after a cycle.
The control panel and the main computer board are not communicating.
The washer's motor cannot spin or is struggling to turn.
The washer cannot detect how much water is in the tub.
The washer is receiving too much electrical power.
The washer's WiFi module has lost communication with the main board.