Error Code dC1
The door lock mechanism has an electrical fault
Moderate
Address soon - your appliance may not work properly
Also displayed as: dC1
What This Means
Door lock switch terminal is connected incorrectly; Door lock switch terminal is broken; Intermittent fault due to electric wire leakage; Main PCB fault
What actually causes this:
The door lock switch has a broken wire connection or the switch itself has worn out
First Thing to Check
Unplug the washer for 2 minutes, then plug it back in and try closing the door again
Parts Involved
How to Fix
- 1
1. Check the door switch for physical damage
- 2
2. Check the main PBA door sensing circuit
- 3
3. Check all wire connections to the door lock switch
- 4
4. If faulty, replace the door lock switch
- 5
5. If the door switch is normal, check and replace Main PBA if faulty
This Error Applies To
Samsung WF56H9100A Series Washers (2018) (2018–present)
Related Error Codes
The small Add Door on top of the main door is open
An internal electronic module cannot communicate with the main board
The WiFi module cannot communicate with the main board
The display screen cannot communicate with the main board
The motor speed controller cannot communicate with the main board
The vibration sensor board has a fault
The washer's main computer chip has stopped working
The washer's main computer chip has stopped working