Error Code DC3
The small Add Door on the main door is not working right
Moderate
Address soon - your appliance may not work properly
Also displayed as: DC3
What This Means
Add Door mechanism fault; Add Door electronic control issue
What actually causes this:
The small door that lets you add items mid-cycle is not responding — usually a temporary glitch
First Thing to Check
Unplug the washer, wait 2 to 3 minutes, plug it back in, and try using the Add Door again
Parts Involved
How to Fix
- 1
1. Check the Add Door for physical obstructions
- 2
2. Power off the machine and power it on again after 2 to 3 minutes
- 3
3. Try the Add Door operation again
- 4
4. If the error persists, inspect the Add Door mechanism and electronics
This Error Applies To
Samsung WF56H9100A Series Washers (2018) (2018–present)
Related Error Codes
The small Add Door on top of the main door is open
An internal electronic module cannot communicate with the main board
The WiFi module cannot communicate with the main board
The display screen cannot communicate with the main board
The motor speed controller cannot communicate with the main board
The vibration sensor board has a fault
The washer's main computer chip has stopped working
The washer's main computer chip has stopped working