Error Code 9C1
The dryer's control board is not receiving the correct voltage
Moderate
Address soon - your appliance may not work properly
Also displayed as: 9C1
What This Means
PCB or wire harness fault; Electrical outlet not working properly; Power not supplied properly
What actually causes this:
The power outlet is not supplying the right voltage, or a wire inside the dryer came loose
First Thing to Check
Check your home's circuit breaker for the dryer — reset it if it has tripped
Parts Involved
How to Fix
- 1
1. Check the PCB and wire harness
- 2
2. Check if the electrical outlet is working properly
- 3
3. Check if power is supplied properly
- 4
4. Replace PCB if defective
This Error Applies To
Samsung WH53DBH700 Series Washers (2024) (2024–present)
Related Error Codes
The dryer is getting an unusual electrical power frequency
A critical electrical component in the dryer is overheating dangerously
The dryer's safety temperature monitor is not working correctly
The dryer's door switch is not working correctly
The main control board and motor control board cannot communicate
The washer cannot read the water temperature correctly
The dryer thinks its door is open
Two of the washer's circuit boards have lost communication