Error Code dC
The dryer thinks its door is open
Moderate
Address soon - your appliance may not work properly
Also displayed as: dC
What This Means
Dryer door is open during operation; Door sensor unit is loose or short-circuited
What actually causes this:
The dryer door is not fully closed, or the door latch sensor is loose
First Thing to Check
Make sure the dryer door is fully closed and latched — push it firmly until you hear a click
Parts Involved
How to Fix
- 1
1. Close the door and run the dryer again
- 2
2. Check if the door sensor unit is loose or short-circuited
This Error Applies To
Samsung WH53DBH700 Series Washers (2024) (2024–present)
Related Error Codes
The dryer is getting an unusual electrical power frequency
The dryer's control board is not receiving the correct voltage
A critical electrical component in the dryer is overheating dangerously
The dryer's safety temperature monitor is not working correctly
The dryer's door switch is not working correctly
The main control board and motor control board cannot communicate
The washer cannot read the water temperature correctly
Two of the washer's circuit boards have lost communication