Error Code 8E2
The washer's vibration sensor board has a problem.
Moderate
Address soon - your appliance may not work properly
Also displayed as: 8E2
What This Means
MEMS PBA fault or data check detected; Wire connections to the MEMS PBA are loose
What actually causes this:
A loose wire connection to the vibration sensor board, or a failed sensor board.
First Thing to Check
Unplug the washer for 5 minutes, then plug it back in and try again.
Parts Involved
How to Fix
- 1
1. Check the wire connections to the MEMS PBA
- 2
2. Replace the MEMS PBA if necessary
This Error Applies To
Samsung WW22K6800AW Series Washers (2015) (2015–present)
Related Error Codes
A door-related communication module has lost contact with the main board.
The washer's main computer chip has failed.
The washer's main computer chip has failed.
The washer's main computer chip has failed.
An internal communication board has lost contact with the main control board.
The washer cannot detect the water level inside the tub.
The washing machine motor is not spinning correctly.
The washer is not getting enough water to start or continue the cycle.