Error Code F2
Sensor short — oven thermistor circuit is shorted
Moderate
Address soon - your appliance may not work properly
What This Means
Shorted oven temperature sensor; Wiring fault; Failed Main PCB
How to Fix
- 1
Follow same diagnostic path as F1
- 2
Unplug unit and check sensor connector and CN1 of Main PCB
- 3
Measure thermistor resistance: normal ~1.09 kΩ at 25°C; abnormal if shorted (very low resistance)
- 4
If thermistor shorted, replace the oven temperature sensor
- 5
If thermistor normal, replace Main PCB; if problem persists, replace Power PCB
Other Error Codes for LSIL6332FE
Right Communication Error — communication error at right inverter module
RF Top Sensor Open/Short — Right Front induction cooktop top sensor is open or shorted
Sensor open — oven thermistor circuit is open
CR Top Sensor Open/Short — Center Rear induction cooktop top sensor is open or shorted
Key short — one or more control keys continuously shorted for over 60 seconds
LF Top Sensor Open/Short — Left Front induction cooktop top sensor is open or shorted
Blower Fan Error — induction cooktop blower fan not working properly
Oven no heating — oven temperature does not exceed 150°F and stays at or below starting temperature for over 5 minutes during preheating with door closed