Error Code F27
Stalled fan lock error — cooling fan stalled during self-clean cycle
Moderate
Address soon - your appliance may not work properly
What This Means
Foreign object obstructing vent/cooling fan; Electrical failure of cooling fan; Rear of oven excessively hot
How to Fix
- 1
After oven stops during self-clean, allow to cool completely then retry self-clean
- 2
If it stops again, inspect vent fan for foreign substances blocking it
- 3
If foreign substance found, remove it and verify electricity supply is working properly
- 4
If no obstruction, check electricity supply to fan
- 5
If oven is stopping and rear side is excessively hot (cannot operate safely), schedule service call
- 6
Check electrical wiring; replace cooling fan if needed
Other Error Codes for LSIL6332FE
Right Communication Error — communication error at right inverter module
RF Top Sensor Open/Short — Right Front induction cooktop top sensor is open or shorted
Sensor open — oven thermistor circuit is open
Sensor short — oven thermistor circuit is shorted
CR Top Sensor Open/Short — Center Rear induction cooktop top sensor is open or shorted
Key short — one or more control keys continuously shorted for over 60 seconds
LF Top Sensor Open/Short — Left Front induction cooktop top sensor is open or shorted
Blower Fan Error — induction cooktop blower fan not working properly