Error Code F3
Key short error — either 25 key short occurred 3 times in 90 seconds, or communication with Touch IC was impossible for more than 60 seconds
Moderate
Address soon - your appliance may not work properly
Also displayed as: F3
How to Fix
- 1
Unplug the unit.
- 2
Check the connecting states between Touch PCB and CN53 of Main PCB.
- 3
If connector is loose or disconnected, reconnect or adjust the connection.
- 4
Plug the unit back in and test button operation.
- 5
If still failing, replace the control panel (with Glass Touch PCB).
- 6
After replacement, check button operation using key test mode: press + and - simultaneously for 3 seconds, then +,- for 3 seconds, then Start; select 't3' using + and press START/Oven Light.
- 7
Access each button in the correct sequence and verify each produces a single beep with the corresponding number appearing on the VFD display.
- 8
If a button does not respond in the test, replace the Main PCB.
Other Error Codes for LTG4715ST
Probe short — lower oven meat probe sensor is shorted
Lower oven sensor open — oven thermistor is open circuit
Lower oven sensor short — oven thermistor is shorted
Lower oven overtemperature — oven temperature exceeded 650°F continuously for 2 minutes during cooking (except self-clean)
Upper oven sensor open — oven thermistor is open circuit
Upper oven overtemperature — oven temperature exceeded 650°F continuously for 2 minutes during cooking (except self-clean)
Convection fan not working
Lower oven door lock failure — door lock motor failed to reach locked or unlocked position during self-clean or lockout