Samsung NE63T8951Ovens & Range
Error Code C0
Top sensor open circuit (cooktop)
Moderate
Address soon - your appliance may not work properly
What This Means
Sensor disconnected; Sensor wire damaged; Sensor failure; Connector housing not fully inserted
How to Fix
- 1
Check sensor connection at PCB
- 2
Check sensor wire for damage and reconnect
- 3
Verify sensor housing is fully inserted in PCB connector
- 4
Measure sensor resistance for open circuit condition
- 5
Replace sensor if defective
- 6
Replace MAIN PCB if electrical connections are normal
Other Error Codes for NE63T8951
C-30
Main PCB sensor open circuit
bAd LInE
Power cord installed improperly
C-A2
Sub PCB temperature abnormally high
C-d0
Key short - knob continuously pushing/jamming
C1
Over temperature on cooktop burner
A2
DC motor locking or jamming
C-23
Temperature probe sensor short circuit
C-21
Oven heating over - abnormal temperature rise