What does error code C-F2 mean on a Samsung NX58M6630SS?

Main PCB to Touch module communication error Software version mismatch between Main PCB and Touch module; Faulty PCB

How do I fix error code C-F2 on my Samsung NX58M6630SS?

1. undefined: Check software versions by pressing Keep Warm and number 3 simultaneously for 3 seconds 2. undefined: Verify Main PCB version is 1204 and Touch module version is 02 3. undefined: If versions do not match, replace the PCB

Samsung NX58M6630SSOvens & Range

Error Code C-F2

Main PCB to Touch module communication error

Moderate

Address soon - your appliance may not work properly

What This Means

Software version mismatch between Main PCB and Touch module; Faulty PCB

How to Fix

1
Check software versions by pressing Keep Warm and number 3 simultaneously for 3 seconds
2
Verify Main PCB version is 1204 and Touch module version is 02
3
If versions do not match, replace the PCB

Other Error Codes for NX58M6630SS

C-21

Oven overheating — oven temperature exceeds 650°F (343°C) in any cooking function except self-clean

C-31

PCB ambient temperature too high — temperature around PCB is excessive

C-d0

Shorted keypad key detected

C-20

Oven temperature sensor open (resistance over 2950 ohms) or shorted (resistance under 930 ohms)

C-30

PCB internal sensor opened (over 3900 ohms) or shorted

C-d1

Door locking mechanism error — door lock motor or switch malfunction

Need more help with your Samsung NX58M6630SS?