Error Code C-24
Oven vent blocked — airflow restricted at oven vent or cover air
Moderate
Address soon - your appliance may not work properly
What This Means
Aluminum foil or other material blocking oven vent; Aluminum foil or other material blocking cover air opening; Delayed ignition of broil burner causing heat buildup; Defective broil burner or HSI
How to Fix
- 1
Open oven door and wait at least 60 seconds, then press OFF or disconnect power to reset
- 2
Check whether oven vent or cover air is blocked by aluminum foil or other items
- 3
Remove any blockage from oven vent or cover air
- 4
Check for delayed ignition of broil burner
- 5
If broil burner or HSI is faulty, repair or replace
Other Error Codes for NX60T8711SB
Oven overheating - oven temperature sensor detects excessive heat or heating elements are stuck on
Door locking malfunction — door lock motor or switch failure
Communication error between main PCB and sub/display module, or between sub and LCD
Communication error between sub PCB and touch panel
Ambient temperature of display PCB is excessively hot — cooling fan failure
Oven temperature sensor open circuit (resistance over 2950 ohms) or shorted (under 930 ohms)
Key short — dial knob is stuck or continuously pushed