What does error code C-d0 mean on a Samsung NX60T8711SG?

Key short — dial knob is stuck or continuously pushed Knob dial mechanically jammed; Defective sub PCB

How do I fix error code C-d0 on my Samsung NX60T8711SG?

1. undefined: Check whether knob dial is jammed or stuck in pressed position 2. undefined: If knob is jammed, replace knob dial 3. undefined: If knob is not jammed, replace sub PCB

Samsung NX60T8711SGOvens & Range

Error Code C-d0

Key short — dial knob is stuck or continuously pushed

Moderate

Address soon - your appliance may not work properly

What This Means

Knob dial mechanically jammed; Defective sub PCB

How to Fix

1
Check whether knob dial is jammed or stuck in pressed position
2
If knob is jammed, replace knob dial
3
If knob is not jammed, replace sub PCB

Other Error Codes for NX60T8711SG

C-21

Oven overheating - oven temperature sensor detects excessive heat or heating elements are stuck on

C-d1

Door locking malfunction — door lock motor or switch failure

C-F0

Communication error between main PCB and sub/display module, or between sub and LCD

C-F2

Communication error between sub PCB and touch panel

C-24

Oven vent blocked — airflow restricted at oven vent or cover air

C-A2

Ambient temperature of display PCB is excessively hot — cooling fan failure

C-20

Oven temperature sensor open circuit (resistance over 2950 ohms) or shorted (under 930 ohms)

Need more help with your Samsung NX60T8711SG?