Error Code C-F0
Communication error between main PCB and sub/display module, or between sub and LCD
Moderate
Address soon - your appliance may not work properly
What This Means
Loose or damaged communication wire harness between main and sub PCB; Defective sub PCB; Defective main PCB
How to Fix
- 1
Check wire harness on Main PCB connector CNS600 and Sub PCB connector CNS200
- 2
Reconnect communication wire if loose
- 3
If communication wire is good, replace sub PCB
- 4
If problem persists after sub PCB replacement, replace main PCB
Other Error Codes for NX60T8711ST
Oven overheating - oven temperature sensor detects excessive heat or heating elements are stuck on
Door locking malfunction — door lock motor or switch failure
Communication error between sub PCB and touch panel
Oven vent blocked — airflow restricted at oven vent or cover air
Ambient temperature of display PCB is excessively hot — cooling fan failure
Oven temperature sensor open circuit (resistance over 2950 ohms) or shorted (under 930 ohms)
Key short — dial knob is stuck or continuously pushed