Prax
Sign InGet Started
LGWashers2016–present

LG WM8100H Series Washers (2016)

Covers Service manual exact match: WM8100HWA, Service manual exact match: WM8100HVA

12 error codes
14 parts documented

Error Codes

Click any code for detailed troubleshooting steps

CodeMeaningView
dE1Door Open Error — door not fully closed or door switch circuit fault.
dE2Door Open Error (variant) — door switch circuit fault, same root causes as dE1.
EEEEPROM Error — EEPROM is out of order. Displayed only when START/PAUSE button is first pressed in Load Test Mode.
FEOverflow Error — water is overflowing; water level frequency is over 21.3 kHz. Note: when FE is displayed, the drain pump will operate automatically to drain water. Power will NOT be turned off automatically.
IEWater Inlet Error — correct water level (24.6 kHz) not reached within 8 minutes after water is supplied, or does not reach preset water level within 20 minutes.
LELocked Motor Error — motor or motor harness fault.
OEDrain Error — tub not fully drained within 10 minutes.
PEPressure Sensor Error — PRESSURE SENSOR ASSEMBLY is out of order; water level frequency consistently below 10 kHz or over 30 kHz. Note: PE error will not disappear when START/PAUSE is pressed; if unresolved within 20 seconds power turns off and error blinks.

Showing 8 of 12 error codes

Need more help with your LG washers?