Error Code HS
Humidity sensor is broken or wet
Moderate
Address soon - your appliance may not work properly
Also displayed as: HS LED blinks
What This Means
Sensor wire disconnected from CN60; Sensor resistance out of range; Moisture damage to sensor
What actually causes this:
Water intrusion on sensor or loose connection
First Thing to Check
Check CN60 connector for moisture or loose pins
Parts Involved
How to Fix
- 1
1. Measure voltage at MAIN PCB CN60-3 to CN60-7
- 2
2. Voltage should be between 4.5V and 1.0V
- 3
3. Check connector seating and pins
- 4
4. Check for moisture on sensor
Other Error Codes for RF22R7351EF
Freezer temperature sensor is broken or disconnected
Outside temperature sensor is not working
Ice storage room temperature sensor is not working
Flex Zone damper heater circuit is broken
Refrigerator temperature sensor is broken or disconnected
Flex-Zone temperature sensor is broken or disconnected
Freezer fan motor is not running
Control board IO expander chip is not working