Error Code CLV
House electrical power is too low
Critical
Stop using immediately - risk of damage or safety issue
Also displayed as: CLV LED blinks
What This Means
House voltage below 110V AC; Main PCB power supply failure; Loose power connection; Defective power cord
What actually causes this:
House voltage too low or refrigerator on same circuit as heavy appliance
First Thing to Check
Check if refrigerator is plugged into same outlet as large appliance
Parts Involved
How to Fix
- 1
1. Use multimeter to measure input power at wall socket
- 2
2. Should read AC 110-127V (North America) or AC 220-240V (Europe)
- 3
3. Check main power cord connection
- 4
4. Check PCB bottom side soldering
Other Error Codes for RF22R7351EU
Freezer temperature sensor is broken or disconnected
Outside temperature sensor is not working
Ice storage room temperature sensor is not working
Flex Zone damper heater circuit is broken
Refrigerator temperature sensor is broken or disconnected
Flex-Zone temperature sensor is broken or disconnected
Freezer fan motor is not running
Control board IO expander chip is not working