Error Code 83C
The compressor motor rotor position sensor failed
Critical
Stop using immediately - risk of damage or safety issue
Also displayed as: 83C
What This Means
Compressor motor wiring disconnected (U, V, W); Compressor phase voltage loss; IPM position sensing circuit failure; PCB soldering defect; Defective compressor
What actually causes this:
The compressor wires are loose or the inverter can't detect motor position
First Thing to Check
The compressor won't start at all
Parts Involved
How to Fix
- 1
1. Check compressor wire connections (U, V, W terminals)
- 2
2. Verify all wires are firmly connected
- 3
3. Check PCB bottom side for cold solder joints
- 4
4. Measure AC voltage at compressor terminals during startup
- 5
5. If wiring and soldering normal, replace Inverter PBA
- 6
6. If error persists, check compressor rotor position sensor
Other Error Codes for RF23DB9900
The proximity sensor hardware is broken
The freezer temperature sensor isn't reading correctly
The fridge temperature sensor isn't reading correctly
The humidity sensor isn't working properly
The Cool Select room temperature sensor is malfunctioning
The Cool Select room fan isn't working properly
The ice maker temperature sensor isn't working
The cubed ice maker has failed multiple times