Error Code ICE_MAKER_FUNCTION_CUBED
Cubed ice maker is not completing its ice-making cycle
Moderate
Address soon - your appliance may not work properly
Also displayed as: F and R blink (Cubed ice maker function error)
What This Means
Ice maker motor failure; Mechanical obstruction in ice maker; Wiring connection failure to ice maker
What actually causes this:
The cubed ice maker motor or mechanism has failed, or there is a water supply problem preventing ice from being made.
First Thing to Check
Press the test button on the ice maker and watch for the motor to turn; if nothing happens, check the wiring harness connection.
Parts Involved
How to Fix
- 1
Press the ice maker test switch for over 1.5 seconds and observe if the motor rotates
- 2
Check MICOM MIC01 pin 22 for 5V during rotation
- 3
If motor does not rotate: check wire connections, replace ice maker kit
- 4
Check water supply after motor cycle completes
Other Error Codes for RF29BB8600QL
Ice bites maker water fill tube heater is open or shorted
Fridge compartment defrost sensor is faulty or disconnected
Ice bites maker temperature sensor is faulty
Freezer defrost sensor is faulty or disconnected
Fridge compartment temperature sensor reading is out of range
FlexZone compartment temperature sensor is faulty
Ice bites maker is not completing its cycle
Cubed ice maker temperature sensor is faulty