Error Code Ed2
ezDispense Detergent Dispense Sensor Error
Moderate
Address soon - your appliance may not work properly
What This Means
Connector not well connected; Wire cut or damaged
How to Fix
- 1
Confirm Ed2/Ed4 ERROR is displayed
- 2
Check if connector is well connected - reconnect if not
- 3
Check if wire is well connected and not cut
- 4
If wire is damaged: replace module harness and min harness
- 5
If connector and wire OK: replace Sub PCB
Other Error Codes for WM6700HBA
Pressure Sensor Error - water level sensor malfunction
Over Flow Error - water level too high, possible inlet valve failure
ezDispense System Error - automatic detergent injection pump connector fault
LQC Test Mode - problem with Wi-Fi module
LQC Test Mode - connection problem between display PCB and Wi-Fi module
Door Open Error - door not properly closed or locked
Unbalance Error - load is not evenly distributed in drum
Too much detergent causing excessive suds