LG WM6700HBAWasher
Error Code Ed4
ezDispense Softener Dispense Sensor Error
Moderate
Address soon - your appliance may not work properly
What This Means
Connector not well connected; Wire cut or damaged
How to Fix
- 1
Same procedure as Ed2
- 2
Check connector - reconnect if not connected
- 3
Check wire integrity - replace harness if damaged
- 4
If all OK: replace Sub PCB
Other Error Codes for WM6700HBA
PE
Pressure Sensor Error - water level sensor malfunction
FE
Over Flow Error - water level too high, possible inlet valve failure
Ed5
ezDispense System Error - automatic detergent injection pump connector fault
nF
LQC Test Mode - problem with Wi-Fi module
nE
LQC Test Mode - connection problem between display PCB and Wi-Fi module
dE
Door Open Error - door not properly closed or locked
UE
Unbalance Error - load is not evenly distributed in drum
Oversudsing
Too much detergent causing excessive suds