Error Code TE
The water temperature sensor isn't working right
Moderate
Address soon - your appliance may not work properly
Also displayed as: Hot&Mid LED flash
What This Means
Thermistor not inserted; Thermistor damaged; Wire disconnected; Thermistor defective; Main PCB defective
What actually causes this:
The temperature sensor got disconnected or broke
First Thing to Check
Unplug the washer for a minute and restart it
Parts Involved
How to Fix
- 1
1. Check whether Thermistor is inserted
- 2
2. Check whether Thermistor is damaged
- 3
3. Check the disconnection of the wire
- 4
4. Check thermistor resistance: at 20-30°C: 66.187kΩ to 36.866kΩ
- 5
5. If Thermistor is defective, replace it
- 6
6. If the main PCB is defective, replace it
Other Error Codes for WA41A3000AW
The control boards inside the washer can't communicate
Water is leaking inside the washer
Too much water is in the washer or the water level sensor failed
The laundry load is uneven and the washer can't spin safely
The incoming water is too hot
A button on the washer control panel appears stuck
The washer can't detect the water level properly
The washer isn't filling with water