Error Code LC

The washer has detected a water leak

Also displayed as: LC

What This Means

Air hose is out of place causing water leakage during spin cycle; Tub back at the safety bolts fixing part is broken; Too much detergent causing foaming and front water leakage; Connecting hose to the detergent drawer is connected incorrectly; Drain pump filter cover is engaged incorrectly; Water leakage at the drain hose; Duct condensing holding screws are worn; Nozzle-diaphragm is engaged in the opposite direction or the rubber packaging is omitted; Screws holding the tub back and front are fastened incorrectly; Leakage sensor is faulty; Foreign material (underwear, coins, wire, etc.) in the Draining Bellows or DV Case; Internal hose or product assembly part defect

First Thing to Check

Parts Involved

How to Fix

1. 1

   1. Check for alien substance in the Draining Bellows — since this occurs when an alien substance is in the Draining Bellows, check for natural draining and remove the alien substance

2. 2

   2. Check if the drain motor is defective — if so, replace the motor

3. 3

   3. Check if the water leaks from the tub or from an internal hose connection part

4. 4

   4. Check the laundry type and check if the laundry load is unbalanced

5. 5

   5. Replace the leakage sensor if it is faulty