Error Code OC
Too much water is filling the washer
Critical
Stop using immediately - risk of damage or safety issue
Also displayed as: OC
What This Means
Water level sensor fault; Water level sensor hose bent, damaged, or has a hole; Freezing in the winter season; Water supply valve defective causing continuous water supply
What actually causes this:
The water level sensor hose is kinked or damaged, so the washer cannot tell when to stop filling
First Thing to Check
Turn off the washer and the water supply faucets behind it immediately
Parts Involved
How to Fix
- 1
1. If the water level sensor has a functional error, replace it
- 2
2. Check the hose — error occurs if hose is bent, damaged, or has a hole
- 3
3. Check if water is frozen in the winter season — consider relocating the unit to a warmer location
- 4
4. Replace water supply valve if defective
Other Error Codes for WA45T3200AW
The water inside the washer is dangerously hot
The washer cannot detect where the clutch is positioned
The vibration sensor board is not working
The vibration sensor board is not working
The water level sensor cannot detect the water level
The washer's motor is not spinning properly
The power supply voltage is too high
The power supply voltage is too low