Error Code PC
The washer cannot detect where the clutch is positioned
Moderate
Address soon - your appliance may not work properly
Also displayed as: PC
What This Means
Clutch hall sensor defective; Clutch mechanism jammed or misaligned; Wire connection to clutch hall sensor disconnected; Main PBA fault
What actually causes this:
The clutch that switches between wash and spin modes has a faulty sensor or is mechanically stuck
First Thing to Check
Turn off the washer, wait a few minutes, and restart — if the error returns, it needs service
Parts Involved
How to Fix
- 1
1. Check the clutch hall sensor connector and wiring
- 2
2. Check the Hall Sensor voltage — Pin 5 on the motor connector is the Clutch Hall IC
- 3
3. Inspect the clutch assembly for mechanical damage or jamming
- 4
4. If the hall sensor is faulty, replace it
- 5
5. If the clutch mechanism is damaged, replace the clutch assembly
Other Error Codes for WA45T3200AW
The water inside the washer is dangerously hot
The vibration sensor board is not working
The vibration sensor board is not working
The water level sensor cannot detect the water level
The washer's motor is not spinning properly
The power supply voltage is too high
The power supply voltage is too low
The clutch sensor signal dropped out during operation