Error Code TC2
The dryer temperature sensor has failed
Moderate
Address soon - your appliance may not work properly
Also displayed as: TC2
What This Means
Dry heater temperature sensor fault; Faulty connections of the dry heater temperature sensor connector; Main PCB fault; Freezing in the winter season
What actually causes this:
The sensor that monitors drying temperature is disconnected or has gone bad
First Thing to Check
Turn off the washer, wait a few minutes, and restart — if the error returns, it needs service
Parts Involved
How to Fix
- 1
1. Check the connections for the dry heater temperature sensor connector
- 2
2. If the dry heater temperature sensor has a functional check, replace it
- 3
3. A TC2 check occurs — verify dry heater temperature sensor
Other Error Codes for WA45T3200AW
The water inside the washer is dangerously hot
The washer cannot detect where the clutch is positioned
The vibration sensor board is not working
The vibration sensor board is not working
The water level sensor cannot detect the water level
The washer's motor is not spinning properly
The power supply voltage is too high
The power supply voltage is too low