Error Code 8C1
The vibration sensor board is not communicating properly.
Moderate
Address soon - your appliance may not work properly
Also displayed as: 8C1
What This Means
Wire disconnection; Defective MEMS PBA; Main PBA wire disconnection; PBA silver nano part malfunction
What actually causes this:
A loose or damaged wire connection to the vibration sensor.
First Thing to Check
Turn off the washer, wait 2-3 minutes, then turn it back on and try again.
Parts Involved
How to Fix
- 1
1. Check wire connections
- 2
2. Replace the MEMS PBA
Other Error Codes for WA46CG3505AVA4
The vibration sensor that helps keep the washer balanced is not working.
The washer is not getting enough voltage from the electrical outlet.
The washer detected a problem with the water heating system.
The washer detected a problem with the water heating system.
The clutch sensor is sending the wrong signal to the control board.
The temperature sensor for the wash water is giving bad readings.
A temperature sensor related to the condensing system is malfunctioning.
A power module inside the washer is overheating.