Error Code dC1
The door lock mechanism is not working properly.
Moderate
Address soon - your appliance may not work properly
Also displayed as: dC1
What This Means
Door lock switch unit not inserted; Door lock switch unit damaged; Wire disconnected from door lock switch; Door lock switch unit defective; Defective main PCB
What actually causes this:
The door latch mechanism is worn out or misaligned, or a wire connection to the lock has come loose from vibration.
First Thing to Check
Turn off the washer, unplug it, wait one minute, then plug it back in and try closing the lid firmly.
Parts Involved
How to Fix
- 1
1. Check whether the door lock switch unit is inserted properly
- 2
2. Check whether the door lock switch unit is damaged
- 3
3. Check the disconnection of the wire
- 4
4. Check the resistance for Lock/Unlock Contact: Lock (White-Red Wire), Unlock (White-Blue Wire) — resistance should be approximately 0.2 ohms between terminals of Contact
- 5
5. Check the Door Lock/Unlock state
- 6
6. If the door lock switch unit is defective, replace it
- 7
7. If the main PCB is defective, replace it
Other Error Codes for WA46CG3505AVA4
The vibration sensor that helps keep the washer balanced is not working.
The vibration sensor board is not communicating properly.
The washer is not getting enough voltage from the electrical outlet.
The washer detected a problem with the water heating system.
The washer detected a problem with the water heating system.
The clutch sensor is sending the wrong signal to the control board.
The temperature sensor for the wash water is giving bad readings.
A temperature sensor related to the condensing system is malfunctioning.