Error Code 1C
The water level sensor cannot detect how much water is in the tub.
Moderate
Address soon - your appliance may not work properly
Also displayed as: 1C
What This Means
Defective water level sensor; Water level sensor terminal not properly connected; Water level sensor hose broken or disconnected; Incorrect part code water level sensor installed; Defective main PCB
What actually causes this:
Usually a loose wire connection on the water level sensor or a cracked sensor hose.
First Thing to Check
Unplug the washer for 30 seconds and plug it back in to see if the code clears.
Parts Involved
How to Fix
- 1
1. Check that the water level sensor and connector are connected (Blue Color Wire, Orange Color Wire)
- 2
2. Measure frequency: should be approximately 26.4 KHz without water (minimum 25.9 KHz)
- 3
3. If the water level sensor is defective, replace it
- 4
4. If no problems found with the sensor, replace the PBA (main PCB)
Other Error Codes for WA47CG3500AVA4
The vibration sensor that helps keep the washer balanced is not working.
The vibration sensor board is not communicating properly.
The washer is not getting enough voltage from the electrical outlet.
The washer detected a problem with the water heating system.
The washer detected a problem with the water heating system.
The clutch sensor is sending the wrong signal to the control board.
The temperature sensor for the wash water is giving bad readings.
A temperature sensor related to the condensing system is malfunctioning.