Error Code dC
The washer thinks the lid is open and will not run.
Moderate
Address soon - your appliance may not work properly
Also displayed as: dC
What This Means
Door not properly closed; Laundry caught in the door; Debris build-up in the door lock tray; Defective door switch; Defective main PCB door detection circuit
What actually causes this:
Usually the lid is not fully closed, or a piece of clothing is caught preventing the lid from latching.
First Thing to Check
Open and firmly close the lid, making sure no clothing or items are caught in the edges.
Parts Involved
How to Fix
- 1
1. Check the resistance for Reed SW (White-Green Wire): should be approximately 0.2 ohms between terminals
- 2
2. Check the resistance for Motor (Black-Brown Wire): should be 33 to 46 ohms between terminals
- 3
3. Since 120V power is connected, check if the power cord is disconnected or check insulation status
- 4
4. If the main PBA door detection circuit is defective, replace it
- 5
5. Ensure door is closed all the way with no laundry caught in the door
Other Error Codes for WA47CG3500AVA4
The vibration sensor that helps keep the washer balanced is not working.
The vibration sensor board is not communicating properly.
The washer is not getting enough voltage from the electrical outlet.
The washer detected a problem with the water heating system.
The washer detected a problem with the water heating system.
The clutch sensor is sending the wrong signal to the control board.
The temperature sensor for the wash water is giving bad readings.
A temperature sensor related to the condensing system is malfunctioning.