Error Code LC
The washer has detected water where it should not be, possibly a leak.
Critical
Stop using immediately - risk of damage or safety issue
Also displayed as: LC
What This Means
Foreign material (wire, coins, etc.) in the draining bellows; Defective drain motor; Water leak from the tub; Water leak from hose connection parts; Drain hose not positioned correctly
What actually causes this:
Usually the drain hose is not positioned at the right height, or a small item like a coin got stuck in the drain causing a backup.
First Thing to Check
Check that the drain hose end is between 39 and 96 inches high where it connects to your plumbing.
Parts Involved
How to Fix
- 1
1. Check if there is foreign material in the draining bellows (coins, underwear, wires, etc.)
- 2
2. Remove any foreign substance and perform natural drain test
- 3
3. If the drain motor is defective, replace it
- 4
4. Check if water leaks from the tub or from connection parts
- 5
5. Check drain hose positioning: minimum height 39 in. (99 cm), maximum height 96 in. (245 cm)
- 6
6. If using a standpipe, ensure drain hose is inserted 6-8 in. (152-203 mm) into standpipe and connection is not airtight
Other Error Codes for WA47CG3500AVA4
The vibration sensor that helps keep the washer balanced is not working.
The vibration sensor board is not communicating properly.
The washer is not getting enough voltage from the electrical outlet.
The washer detected a problem with the water heating system.
The washer detected a problem with the water heating system.
The clutch sensor is sending the wrong signal to the control board.
The temperature sensor for the wash water is giving bad readings.
A temperature sensor related to the condensing system is malfunctioning.