Error Code PC1
The clutch sensor is sending the wrong signal to the control board.
Moderate
Address soon - your appliance may not work properly
Also displayed as: PC1
What This Means
Incorrect clutch hall signal after position detection; Clutch hall sensor defective; Clutch mechanism worn or damaged; Defective main PCB
What actually causes this:
The clutch sensor has worn out or its signal wiring has come loose.
First Thing to Check
Unplug the washer for one minute and plug it back in.
Parts Involved
How to Fix
- 1
1. Turn off the washer, unplug it, wait one minute, then plug in again
- 2
2. Inspect the clutch hall sensor and wiring
- 3
3. Contact Samsung customer service if issue persists
Other Error Codes for WA47CG3500AVA4
The vibration sensor that helps keep the washer balanced is not working.
The vibration sensor board is not communicating properly.
The washer is not getting enough voltage from the electrical outlet.
The washer detected a problem with the water heating system.
The washer detected a problem with the water heating system.
The temperature sensor for the wash water is giving bad readings.
A temperature sensor related to the condensing system is malfunctioning.
A power module inside the washer is overheating.