Error Code TC2
The dryer temperature sensor is not reading correctly.
Moderate
Address soon - your appliance may not work properly
Also displayed as: TC2
What This Means
Dry temperature sensor fault; Condensing sensor fault; Faulty connection or disconnected connector; Main PCB fault
What actually causes this:
The dryer temperature sensor connector has come loose or the sensor has failed.
First Thing to Check
Unplug the washer, wait one minute, plug it back in, and try again.
Parts Involved
How to Fix
- 1
1. Check the connections for the dry heater temperature sensor connector
- 2
2. If the dry heater temperature sensor has a functional check, replace it
- 3
3. If main PCB is faulty, replace it
Other Error Codes for WA49B5105AV
The drain module has lost communication with the main control board.
The dryer heating element has a wiring or component failure.
The washer's main computer chip has stopped working.
The display module has lost communication with the main control board.
The motor speed controller has lost communication with the main control board.
A button on the control panel appears to be stuck or pressed continuously.
The washer's heating element has a problem or is overheating.
The WiFi module has lost communication with the main control board.