Error Code TC3
One of the washer's temperature sensors is not working.
Moderate
Address soon - your appliance may not work properly
Also displayed as: TC3
What This Means
Condensing sensor fault; Main PCB fault; Connector disconnected or incorrectly connected
What actually causes this:
A temperature sensor has failed or its connector has come loose.
First Thing to Check
Unplug the washer, wait one minute, plug it back in, and try again.
Parts Involved
How to Fix
- 1
1. Check temperature sensor connector connections
- 2
2. Replace sensor if faulty
- 3
3. Replace main PCB if sensor is OK
Other Error Codes for WA49B5105AV
The drain module has lost communication with the main control board.
The dryer heating element has a wiring or component failure.
The washer's main computer chip has stopped working.
The display module has lost communication with the main control board.
The motor speed controller has lost communication with the main control board.
A button on the control panel appears to be stuck or pressed continuously.
The washer's heating element has a problem or is overheating.
The WiFi module has lost communication with the main control board.