Error Code 4C2
The water coming in is too hot for the selected cycle.
Moderate
Address soon - your appliance may not work properly
Also displayed as: 4C2
What This Means
Cold/hot hoses swapped; Water temp >70°C during dry valve; Water temp >50°C in Wool/Lingerie
What actually causes this:
The hot and cold water hoses are connected to the wrong faucets.
First Thing to Check
Check the hoses behind the washer and make sure the cold water hose goes to the cold tap and the hot water hose goes to the hot tap.
Parts Involved
How to Fix
- 1
1. Check hose connections at faucets
Other Error Codes for WA49B5105AW
The drain module has lost communication with the main control board.
The dryer heating element has a wiring or component failure.
The washer's main computer chip has stopped working.
The display module has lost communication with the main control board.
The motor speed controller has lost communication with the main control board.
A button on the control panel appears to be stuck or pressed continuously.
The washer's heating element has a problem or is overheating.
The WiFi module has lost communication with the main control board.