Error Code 8C
An antibacterial system component has stopped working.
Moderate
Address soon - your appliance may not work properly
Also displayed as: 8C
What This Means
MEMS PBA wire connection fault; Main PBA Silver Nano part malfunction; MEMS PBA fault
What actually causes this:
A wire connection to the Silver Nano antibacterial part has come loose.
First Thing to Check
Unplug the washer for 60 seconds, then plug it back in and try again.
Parts Involved
How to Fix
- 1
1. Check wire connections to MEMS PBA
- 2
2. Replace MEMS PBA if necessary
- 3
3. Check Main PBA wire connection or Silver Nano part — replace if necessary
Other Error Codes for WA50A5400AV
Your washer cannot detect how much water is in the tub.
A vibration sensor wire has come loose inside the washer.
The washer's WiFi module has lost its connection to the main board.
Your washer's door lock mechanism is not working correctly.
Your washer is filling with too much water and cannot detect when to stop.
Your washer has detected a water leak.
An internal power module in the washer is overheating.
Your washer's vibration sensor is not communicating properly.