Error Code 8C1
Your washer's vibration sensor is not communicating properly.
Moderate
Address soon - your appliance may not work properly
Also displayed as: 8C1
What This Means
Wire connections to external MEMS PBA disconnected; MEMS PBA data fault; Main PBA fault
What actually causes this:
A wire connection to the vibration detection sensor has come loose.
First Thing to Check
Unplug the washer for 1 minute, then plug it back in and try again.
Parts Involved
How to Fix
- 1
1. Check the wire connections if there is an external MEMS PBA
- 2
2. Replace MEMS PBA if necessary
- 3
3. Replace Main PBA if necessary
Other Error Codes for WA50A5400AV
Your washer cannot detect how much water is in the tub.
A vibration sensor wire has come loose inside the washer.
The washer's WiFi module has lost its connection to the main board.
Your washer's door lock mechanism is not working correctly.
Your washer is filling with too much water and cannot detect when to stop.
Your washer has detected a water leak.
An internal power module in the washer is overheating.
The vibration sensor may be giving inaccurate readings.