Error Code HC1
The washer's heating element or its temperature sensor has failed.
Critical
Stop using immediately - risk of damage or safety issue
Also displayed as: HC1
What This Means
Washing heater contact fault; Temperature sensor fault; Wire disconnection; PBA relay malfunction
What actually causes this:
A faulty temperature sensor near the heater, or a loose heater wire.
First Thing to Check
Unplug the washer, wait one minute, plug it back in, and try again.
Parts Involved
How to Fix
- 1
1. Check for connection between wire and heater
- 2
2. If wash heater is faulty, replace it
- 3
3. If heater is not the problem, replace wash-thermistor
Other Error Codes for WA50B5100AW
The drain module has lost communication with the main control board.
The dryer heating element has a wiring or component failure.
The washer's main computer chip has stopped working.
The display module has lost communication with the main control board.
The motor speed controller has lost communication with the main control board.
A button on the control panel appears to be stuck or pressed continuously.
The washer's heating element has a problem or is overheating.
The WiFi module has lost communication with the main control board.