Error Code HC2
The dryer heating element has a wiring or component failure.
Critical
Stop using immediately - risk of damage or safety issue
Also displayed as: HC2
What This Means
Drying heater short-circuited; Drying heater wire disconnected; PBA relay malfunction
What actually causes this:
A loose or damaged wire at the drying heater connection.
First Thing to Check
Unplug the washer, wait one minute, plug it back in, and try again.
Parts Involved
How to Fix
- 1
1. Check for connection between wire and drying heater
- 2
2. If drying heater is faulty, replace it
- 3
3. If heater is not the problem, check PBA relay
Other Error Codes for WA50B5100AW
The drain module has lost communication with the main control board.
The washer's main computer chip has stopped working.
The display module has lost communication with the main control board.
The motor speed controller has lost communication with the main control board.
A button on the control panel appears to be stuck or pressed continuously.
The washer's heating element has a problem or is overheating.
The WiFi module has lost communication with the main control board.
The washer is getting too much voltage from the power outlet.