Error Code 8C
The washer's vibration sensor board has a problem.
Moderate
Address soon - your appliance may not work properly
Also displayed as: 8C
What This Means
Main PBA wire connection fault or PBA silver nano part malfunction; MEMS PBA is defective; Wire disconnection
What actually causes this:
The MEMS vibration sensor board has failed or its wiring has come loose.
First Thing to Check
Unplug the washer for 2 minutes and plug it back in to reset.
Parts Involved
How to Fix
- 1
1. Check wire connections
- 2
2. Replace the MEMS PBA
- 3
3. Check main PBA silver nano part — replace if necessary
Other Error Codes for WA50K8600AV
The washer's temperature sensor is giving wrong readings.
A specific internal water leak has been found.
There are too many soap suds in the washer.
The washer's clutch position sensor is sending incorrect signals.
The washer's main computer chip has crashed.
The washer cannot detect how much water is in the tub.
The washer's motor cannot spin or is getting bad signals.
The washer is getting too much electrical power.