Error Code HC2
The washer's temperature sensor is giving wrong readings.
Critical
Stop using immediately - risk of damage or safety issue
Also displayed as: HC2
What This Means
Wash thermistor fault; Temperature sensor connector disconnected; Dry temperature sensor fault
What actually causes this:
The temperature sensor (thermistor) that monitors water heat has failed or come unplugged.
First Thing to Check
Unplug the washer and plug it back in after a few minutes. If the code returns, the sensor needs professional service.
Parts Involved
How to Fix
- 1
1. Check the washing temperature sensor connections and connector
- 2
2. Check dry heater temperature sensor connections
- 3
3. If the temperature sensor has a functional error, replace it
Other Error Codes for WA50K8600AW
A specific internal water leak has been found.
There are too many soap suds in the washer.
The washer's vibration sensor board has a problem.
The washer's clutch position sensor is sending incorrect signals.
The washer's main computer chip has crashed.
The washer cannot detect how much water is in the tub.
The washer's motor cannot spin or is getting bad signals.
The washer is getting too much electrical power.