Error Code OC
Your washer is filling with too much water and cannot detect when to stop.
Critical
Stop using immediately - risk of damage or safety issue
Also displayed as: OC
What This Means
Water level sensor terminal is out of place; Water supplied continuously because water level detection is not working; Drain hose is clogged (injection issue or foreign material) preventing water level detection; Water supply valve frozen or blocked with foreign material allowing continuous water supply; Water level sensor is degraded
What actually causes this:
The water level sensor has failed, so the washer does not know when it is full and keeps filling.
First Thing to Check
Turn off the water supply faucets behind the washer immediately, then unplug the machine.
Parts Involved
How to Fix
- 1
1. Check for a defective water valve — could be stuck open
- 2
2. Check the water valve operation
- 3
3. Replace the water level sensor if degraded
- 4
4. Check drain hose for clogs
Other Error Codes for WA50R5200AV
Your washer cannot detect how much water is in the tub.
A vibration sensor wire has come loose inside the washer.
The washer's WiFi module has lost its connection to the main board.
Your washer's door lock mechanism is not working correctly.
Your washer has detected a water leak.
An internal power module in the washer is overheating.
Your washer's vibration sensor is not communicating properly.
The vibration sensor may be giving inaccurate readings.