Error Code DC2
The door switch has overheated from being turned on and off too many times.
Moderate
Address soon - your appliance may not work properly
Also displayed as: DC2
What This Means
Power switch turned on/off continually generating excessive heat; Door switch unit defect due to power switch overuse; Main PCB defect
What actually causes this:
Rapidly and repeatedly pressing the power button causes the door switch to overheat.
First Thing to Check
Unplug the washer and let it sit for 15 minutes to cool down, then try again.
Parts Involved
How to Fix
- 1
1. Check whether the Power switch or a control panel button is being pressed continually
- 2
2. Check the state of the door switch unit
- 3
3. If the main PCB is defective, replace it
Other Error Codes for WA50R5200AW
Your washer cannot detect how much water is in the tub.
A vibration sensor wire has come loose inside the washer.
The washer's WiFi module has lost its connection to the main board.
Your washer's door lock mechanism is not working correctly.
Your washer is filling with too much water and cannot detect when to stop.
Your washer has detected a water leak.
An internal power module in the washer is overheating.
Your washer's vibration sensor is not communicating properly.