Error Code 4C2
The water coming into your washer is too hot for the selected cycle.
Moderate
Address soon - your appliance may not work properly
Also displayed as: 4C2
What This Means
Water supplied through dry valve during dry cycle exceeds 70°C; Water temperature exceeds 50°C during Wool or Lingerie cycle
What actually causes this:
The hot and cold water hoses are usually connected to the wrong inlets — they are swapped.
First Thing to Check
Check that the hot water hose goes to the hot inlet and the cold hose goes to the cold inlet.
Parts Involved
How to Fix
- 1
1. Verify the hot water supply temperature is not excessively high
- 2
2. Check the temperature sensor reading
- 3
3. Check if the hot and cold water hoses are connected to the correct inlets
Other Error Codes for WA50T5300AW
Your washer cannot detect how much water is in the tub.
A vibration sensor wire has come loose inside the washer.
The washer's WiFi module has lost its connection to the main board.
Your washer's door lock mechanism is not working correctly.
Your washer is filling with too much water and cannot detect when to stop.
Your washer has detected a water leak.
An internal power module in the washer is overheating.
Your washer's vibration sensor is not communicating properly.